U-Verse Router [Login, Setup, Reset, Defaults]

It is necessary to login to the Uverse router in order to access the default settings dashboard of the Uverse router. In this article, I have mentioned a step by step guide which will help you throughout the whole process. Also, you will get tutorials on changing the default username and password for your Uverse router.

Logging in to Uverse router is an easy and simple process. All you need to do is to follow the step by step guide mentioned below.

Now, let’s move towards our main topic.

Contents

1 How to login to your Uverse router?
2 FAQs

How to login to your Uverse router?

First of all, you need to check if you have all the below-mentioned pre-requisites.

A Uverse Router
A good connection with your wireless router. You can establish a connection either by using a wireless connection or a wired connection.
A website browser (such as Google Chrome, Mozilla Firefox, Safari, Internet Explorer, etc)

If you have fulfilled all the above-mentioned requirements then follow the steps below to login to your Uverse router.

Step – 1: First of all, check if your device is connected to your router’s wireless network. you can connect your device to your router by using a wireless connection or by using a wired connection. A wired connection can be established by using an Ethernet cable.
Step – 2: Open your web browser and left-click on the address bar.
Step – 3: In the address bar, type http://192.168.1.254. This is the default IP address for Uverse router which will help you to get access to your router’s control panel.

If this default IP address is not working for you then you can search for the default IP address list of your router on the internet just by entering the model number for your router.

Step – 4: Now, you will be redirected to the login page of the Uverse router where you will be asked to enter the default login credentials. The default username and password for Uverse router is as follows:

Username: admin

Password: attadmin

If these login credentials did not work for you then you can search for your router’s default username and password throughout the internet simply by typing in your routers model number in the search bar. Usually, the default username and password of a router are printed on a sticker which is later on attached to the router. You can search for the default username and password there.

Step – 5: Now, click on the sign-in button and within a few seconds you will be redirected to the settings dashboard of Uverse router.

How to set up a Uverse router?

If you want to set up your newly bought Uverse router then follow the step-by-step guide below:

Step – 1: First of all connect your router to the power supply. Now, connect the Ethernet adapter of your router to your computer.
Step – 2: Now connect your modem to your router and check if the LED lights of your router turn into solid green.
Step – 3: Now, turn off the internet security software running on your computer.
Step – 4: Configure the internet settings of your browser and then open the Start menu on your computer. After that go to settings > Control panel > Internet Options. Restore the settings to the default.
Step – 5: After that login to your Uverse router.

How to reset a Uverse Router?

If your router or modem is not working properly or in case you have forgotten your router’s username and password then you have to reset your router and that is the last option left for you.

The procedure for resetting your Uverse router manually is very simple. After you have done resetting your router, all the previously made configurations will be lost and you will have to modify your settings again. That is why it is recommended to write down all previously made configurations somewhere else so that you won’t face any error.

Step – 1: Locate the reset button on your Uverse router.
Step – 2: Press and hold the reset button for 15 to 20 seconds by using a think object such as a paper clip, or pen.
Step – 3: Now wait until the Uverse router reboots if your router does not restarts then it means that the reset procedure is incomplete.
Step – 4: Check if the service status lights are green on your Uverse router if yes then it means that the resetting process is completed successfully.

This is how you can reset your Uverse router without facing any problem.

U-Verse Router Default Login Details: How to Change it?

After you have successfully logged in to your router’s settings dashboard, you can also modify the router’s default settings to make it more secure. To change the default administration password then follow the steps below:

Step – 1: Connect your Uverse router to your network and check if the router is turned on or not.
Step – 2: Now, login to your Uverse router and after getting access to the settings dashboard head towards Smart Home Manager.
Step – 3: In the Smart Home Manager, click on the More button.
Step – 4: Select the Network option from there.
Step – 5: Select the relevant information that you want to change (wifi network name and password).
Step – 6: Enter the new wifi network name or password in the required fields and then select the save option to save the changes.

Make sure to test these changes.

Other Routers:

FAQs

What is the default username and password for the Uverse router?

The default username and password for Uverse router is given below:

Username: admin

Password: attadmin

Usually, the default username and password of a router are printed on a sticker which is later on attached to the router. You can search for the default username and password there.

How do I find my password?

You can find the default password of your router in the router manual or you can simply type your router’s model number along with your query in the search bar and the search engine will show you many results.

How do I check my Uverse router history?

You can view your Uverse router’s search history by using your browser. Another option is to log in to your Uverse router and head towards the logs under the diagnostics of your router.

This was all about logging in to your Uverse router. if you have any questions or queries then do let me know in the comments.