Westell Router is another excellent product provided by Verizon Wireless to its consumers. This router offers its users with excellent internet speed and better standards of router security. Westell Router is the best choice for home networks and small offices.
But what if someone in your working place knows the login details of your router? If that happens, then you will undoubtedly face many problems. That particular person can also change the login details and admin access to your Westell Router.
In order to become safe from all of these problems, we will recommend you to configure the settings of your Westell Router manually according to your choice. For this purpose, you need to login to your Westell Router.
In this article, I have compiled a step by step guides covering some significant portions regarding Westell Router such as Login Guide, Setup Guide, and the Reset Guide. Also, you will learn how to make your Westell Router network more secure. So, let’s start the process.
How to Login to a Westell Router?
The settings dashboard of Westell Router is the web interface where all the settings regarding your router are stored so that you can modify them easily without any hassle. In order to login to a Westell Router, remember the following details as they will be needed during the login process.
Default IP address: 192.168.1.254
Default Username: admin
Default Password: password
Now, follow the Westell Router Login Guide below:
- Step – 1: First of all, connect your device to the wireless network of your Westell Router either by using a wireless or a wired connection. (A wired connection can be established by using an Ethernet cable).
- Step – 2: Now open your web browser and type the default IP address (192.168.1.254) for Westell Router in the address bar. After typing, hit the enter key to proceed.
- Step – 3: After that, you will see a login page on your device interface. Here you will be asked to enter the username and password for your Westell Router. If you have not modified your router’s settings before then, use the default username (admin) and password (password) for Westell Router.
- Step – 4: Click on the sign-in button.
After a few seconds, you will be prompted towards the settings dashboard of your Westell Router where you can make necessary changes to your router’s wireless network.
After logging in to the Westell Router, the next most crucial step is to take the quick security measures.
Westell Router Default Login Credentials: How to Change?
Changing the default login details for a Westell Router is a useful step for the betterment of your router’s wireless network. If you want to make your Westell Router secure then follow the step by step guide mentioned below:
- Step – 1: In order to change the default login credentials, you need to login to your router first. You can use the guide mentioned above to do so.
- Step – 2: When you have finished logging in to your Westell Router’s settings dashboard then go to the Connection Overview section and click on the Edit button.
- Step – 3: Now, navigate to the Edit VOL Connection page.
- Step – 4: Enter a new password and username in the required fields.
- Step – 5: Click on the Save button to save the settings.
- Step – 6: A confirmation pop up will appear on the screen. Click on the OK button to confirm the action.
How to set up a Westell Router?
Are you facing difficulties while setting up your wireless router for the first time? If yes, then there is no need to get worried about it. In this section, you will learn how to set up your Westell Router without facing any sort of issue.
Setting up a Westell Router for the first time may prove difficult for a person who has no idea about the router setup. If you are one of them, then follow these steps:
- Step – 1: Connect your router to your modem with the help of an Ethernet cable.
- Step – 2: Now wait until the DSL, and Internet lights on the modem are green if the light labeled DSL is still blinking then contact the Westell Router customer support.
- Step – 3: Now connect your device to your router by using a LAN (ethernet) cable.
- Step – 4: Open your web browser and enter the default IP address for your Westell Router.
- Step – 5: Log in to your router, and in the home page, you will see a welcome message along with the setup wizard.
- Step – 6: Run the Setup Wizard.
- Step – 7: Follow the on-screen instructions in order to complete the setup process.
- Westell Router [Login, Setup, Reset, Defaults]
- T Mobile router [Login, Setup, Reset, Defaults]
- Tenda router [Login, Setup, Reset, Defaults]
- Clean Router [Login, Setup, IP, Defaults]
How to perform a Hard Reset on a Westell Router?
If you are facing errors in your router network then or if you have forgotten the login details of your router then try resetting your Westell Router to the factory defaults by performing a 30 30 30 hard reset. The hard reset will wipe out all the previously made configurations and you will need to configure your router again.
That is why it is recommended to write all the modifications somewhere which you have made to your Westell Router.
Follow the Westell Router Reset Guide below:
- Step – 1: Check if your router is turned on.
- Step – 2: If it is powered on then locate the reset button on your Westell Router.
- Step – 3: Press and hold the reset button for 30 seconds. You can use the sharp edge of a pin or a paper clip for this purpose/
- Step – 4: While still holding the reset button, unplug your router from the power supply and again hold the reset button for 30 seconds.
- Step – 5: Now, turn on your router to the unit again while still holding the reset button and wait for another 30 seconds for the reset process to get completed.
After that, the router will reboot, and it will be reset to its factory defaults. You can reaccess your router by using the default settings. Still, if the problem is not gone even after the 30 30 30 hard reset then there are chances that your router is broken, it is recommended to contact the Westell Customer Support or otherwise, buy a new router.
Westell Router Port Forwarding
Forwarding ports on your Westell router is a straightforward procedure, and you can do this by following the below guide;
- First of all, assign a new static IP to your device.
- Access your Westell router settings page using its default gateway 192.168.1.254 through a web browser.
- Log in to it using its default username (admin) and default password (password) and press Enter.
- Click on the Configuration option.
- Click on the Define Custom Service link.
- Click on the Port Forwarding Ranges of Ports link.
- Click the Next button.
- Make the name of the service in the Service Name box.
- Enter the same port number in the left and right Global Port Range boxes.
- Pick up a protocol type.
- Click the Next button.
- Choose the application you through the Service Name dropdown list.
- Select the Enable option.
- Click Apply.
Q1. How do I log into my Westell router?
A1. To log into your Westell router, open a web browser and enter the default IP address (192.168.1.1) into the address bar. Then, enter your username and password.
Q2. How do I reset my Westell router to its factory default settings?
A2. To reset your Westell router to its factory default settings, press and hold the reset button on the back of the router for 10 seconds. The router will reboot and the settings will be reset.
Q3. How do I change the wireless network name (SSID) and password on my Westell router?
A3. To change the wireless network name and password on your Westell router, log into the router’s web interface, navigate to the wireless settings, and make the desired changes.
Q4. What is the default username and password for my Westell router?
A4. The default username for most Westell routers is “admin,” and the default password is either “password” or “1234.”
Q5. How do I update the firmware on my Westell router?
A5. To update the firmware on your Westell router, log into the router’s web interface, navigate to the firmware update section, and follow the on-screen instructions to download and install the latest firmware version.